21
STATUS MESSAGE
You can send and receive 2-digit Status messages which may be decided in your
talk group. Messages can contain up to 16 alphanumeric characters. Status
messages range from 10 to 99 (80 ~ 99 are reserved for special messages).
A maximum of 5 received messages can be stored in the stack memory of your
transceiver. These saved messages can be reviewed after reception.
Depending on your dealer settings, when the stack memory is full, either the
oldest message will be erased when a new message is received or the new
message will not be stored in the stack memory. The icon lights when a
message is stored in the stack memory.
■Transmitting
1Select your desired zone and channel.
2Press the key programmed as Status to enter Status mode or Selcall +
Status to enter Selcall mode.
•When using the Status key to enter Status mode, the station ID is fixed and
cannot be selected. Skip to step 5 to continue.
3In Selcall mode, enter the ID of the station you want to call using the
microphone keypad.
4Press the S key to enter Status Mode.
5Enter the status ID you want to transmit using the microphone keypad.
6Press the PTT switch to initiate the Status call.
■Receiving
The icon will flash and a calling ID or text message will appear when a
Status call is received.
Press any key to return to normal operation.
■Reviewing Messages in the Stack Memory
1Press and hold the key programmed as Selcall, Status, or Selcall +
Status for 1 second to enter Stack mode.
•The last received message is displayed with the message number.
2Press the <B and C> keys to select your desired message.
•Press and hold S or key to toggle between the message/ call ID and the
channel name of the received message.
3Press the S key to return to normal operation.
•To delete the selected message, press the A or # key. To confirm the deletion,
press the S or key.
•To delete all messages, press and hold the A or # key for 1 second. To confirm
the deletion, press the S or key.