19
2-TONE SIGNALING
2-tone Signaling is enabled or disabled by your dealer. This function opens the
squelch only when the transceiver receives the 2 tones corresponding to the
2-tone code set up on your transceiver. Transceivers that do not transmit the
correct tones will not be heard.
RECEIVING
When you receive a signal containing the correct code, the squelch opens and
you will hear the call.
•The icon appears on the display and blinks.
•To mute the speaker after the squelch opens, press the key programmed as Monitor.
•Your dealer can program the transceiver to mute the speaker after a specified time
period elapses.
•If Transpond is programmed, an acknowledgment signal is returned to the calling
station. Transpond does not function when you are called with a Group code.
Transpond can send an alert tone.
•If Call Alert is programmed, an alert tone will sound when the correct 2-tone code is
received.
TRANSMITTING
1Press the key programmed as 2-tone Encode to enter 2-tone Encode Select
mode.
2Press the <B and C> keys to select your desired 2-tone Encode code.
•Your dealer can program up to 10 different 2-tone codes on your transceiver.
3Use the transceiver the same as in a regular call; press the PTT switch to
transmit and release it to receive.
•The icon appears on the display.
•When you release the PTT switch, the squelch opens. If no signal is received for a
pre-determined time, the speaker will mute.
•Pressing the key programmed as Monitor at any time will mute the speaker.