Kenwood TK-7160 P

PRECAUTIONS

•Do not attempt to configure the transceiver while driving; it is too dangerous.

•Do not disassemble or modify the transceiver for any reason.

•Do not expose the transceiver to long periods of direct sunlight, nor place it near

heating appliances.

•Do not place the transceiver in excessively dusty, humid, or wet areas, nor on unstable

surfaces.

•If an abnormal odor or smoke is detected coming from the transceiver, switch the

transceiver power off immediately, and contact your KENWOOD dealer.

•Use of the transceiver while you are driving may be against traffic laws. Please check

and observe the vehicle regulations in your area.

•Do not use options not specified by KENWOOD.

FCC WARNING

This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause

harmful interference unless the modifications are expressly approved in the instruction manual. The user could

lose the authority to operate this equipment if an unauthorized change or modification is made.

INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses and can generate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer for technical assistance.