TK-7160
4
OPERATING FEATURES

1. Controls and Functions

1-1. Front Panel

q
io!0 !1 !2 !3 !4
we r ty u

1-2. Microphone

!5
q (Power) switch
Press to switch the transceiver ON or OFF.
w key
Press to activate its programmable function. The default
setting is Volume Up.
e key
Press to activate its programmable function. The default
setting is Volume Down.
rDisplay
Refer to right.
t key
Press to activate its programmable function. The default
setting is Zone Up.
y key
Press to activate its programmable function. The default
setting is Zone Down.
uSpeaker
Internal speaker.
iMicrophone jack
Insert the microphone plug into this jack.
oTX/RX Indicator
Lights red while transmitting. Lights green while receiv-
ing a signal.
!0 key
Press to activate its programmable function. The default
setting is Squelch Off Momentary.
!1 key
Press to activate its programmable function. The default
setting is None (no function).
!2 key
Press to activate its programmable function. The default
setting is Channel Down.
!3 key
Press to activate its programmable function. The default
setting is Channel Up.
!4 key
Press to activate its programmable function. The default
setting is None (no function).
!5 PTT switch
Press this switch, then speak into the microphone to call a
station.

1-3. Display

Indicator Description
Appears when the key programmed as
Monitor or Squelch Off is pressed.
Appears when the DTMF or 2-tone code of
a call matches the code in your transceiver.
Appears while using the Talk Around
function.
The selected zone is added to the
scanning sequence.
Appears while scanning.
Appears when a message is stored in the
transceiver stack memory. Appears and
blinks when a new message has arrived.
Appears when the AUX port has been
activated.
The selected channel is set as a Priority
channel.
Appears when the Horn Alert function
has been activated.
The selected channel is added to the
scanning sequence.
Appears when Scrambler function has
been selected.
Appears when the Public Address
function has been activated.
Displays the currently selected zone and
channel number, or the channel name.

1-4. Rear Panel

External
speaker
jack
Power input
connector
Antenna
connector