TK-7160
8
6. Accessory Connection Cable (KCT-39)The KCT-39 is an accessory connection cable for connect-
ing external equipment. The connector has 15 pins and the
necessary signal lines are selected for use.
6-1. Installing the KCT-39 in the Transceiver
1. Lift the DC cord bushing (
1
) from the chassis. Peel the
pad as shown in Figure 3 (
2
).
1
2
2. Stick the pad to the DC cord (
3
) and chassis (
4
), both
of which are supplied with the KCT-39.
3
4
3. Insert the KCT-39 cable (
5
) into the chassis (
6
). The
wire harness band (
7
) must be inside the chassis and
face down.
4. Connect the KCT-39 to the TX-RX unit as shown in Figure
5 (
8
).
CN2
CN3
A
B
7
8
6
5
Chassis
Chassis
Cushion
KCT-39
sumi tube
PCB
Face down
Avoid forming the wiring towards
the shielding cover closure area.
Wire harness
band (Stopper)
End view of this area
5. Connect the KCT-39 to the external accessory by inserting
the crimp terminal (
9
) into the square plug (
10
), both of
which are supplied with the KCT-39.
9
10
13
15 1
3
1471013
2581114
3691215
No. Color Internal Name
connector
1Red CN2-1 SB
2Pink CN3-1 IGN
3Black CN2-3 GND
4Brown CN3-3 DETO
5Orange CN3-2 DATAI
6Yellow CN2-8 FNC4
7Green CN2-7 FNC3
8Blue CN2-9 FNC5
No. Color Internal Name
connector
9Purple CN2-12 FNC8
10 Gray CN2-10 FNC6
11 White CN2-11 FNC7
12 NC NC
13 NC NC
14
Sky blue
CN2-6 FNC2
15
Turquoise
CN2-5 FNC1
■ Accessory Port Function
Fig. 3
Fig. 4
Fig. 5
Fig. 6
REALIGNMENT