TK-7160
11
INSTALLATION / DISASSEMBLY FOR REPAIR

2. External Speaker (Option)

2-1. KES-3
The KES-3 is an external speaker for the 3.5-mm-diameter
speaker jack.
■ Connection Procedure
1. Connect the KES-3 to the 3.5-mm-diameter speaker jack
on the rear of the transceiver.
2-2. KES-5
External speaker KES-5 can be installed for KAP-2. If KES-
5 is installed, it can be set by changing the CN1 short pin from
pins 4 and 5 to pins 5 and 6 on the KAP-2.
CN1 Connect Set Up
4-5 INT. SP or KES-3
5-6 KES-5
■ Connection Procedure
Insert the crimp terminal into the Square plug supplied
with the KAP-2.
4
5E59-0419-05
Black/White
lead
Black lead
F29-0481-05
1. When you remove the panel, turn the transceiver up side
down. Detach the panel by lifting the tabs as shown be-
low.
Tabs
2. To remove the cabinet, first turn the transceiver up side
down. Detach the cabinet by prying the tabs as shown
below.
Tabs
Tabs
3. When mounting the front panel, match the 4 tabs of the
chassis with the panel, being sure they attach securely.
Tabs
Tabs
Fig. 7
Fig. 1
Fig. 2
Fig. 3