8
INSTALLING/ REMOVING OPTIONAL ACCESSORIESNote: Always switch OFF the transceiver power when installing or
removing the optional accessories.
The following accessories can be used with this transceiver:
•EMC-3 Clip Microphone and Earphone
•HMC-3 VOX/PTT Headset
•KHS-21 Headset
•SMC-32 Speaker-Microphone
•SMC-33 Speaker-Microphone
•SMC-34 Speaker-Microphone
To install these accessories:
1Open the SP/MIC tabs on the side of the transceiver.
2Insert the accessory’s plugs into the SP/MIC jacks.
3When you remove the accessory from the transceiver, be
sure to cover the SP/MIC jacks with the attached tabs in
order to keep dust and dirt away from the contacts.
Note:
◆Refer to the accessory instruction manuals for detailed
instructions on each of the accessories.
◆The transceiver is not water resistant while using accessories.