12
MENU SETTINGS
Your transceiver has a hidden setting menu which allows you
to adjust a variety of features to your desired settings. To
enter Menu Setting:
1Press and hold the ▲ key while turning the transceiver
power ON.
2To view the various settings, press the ▲ or ▼ key.
Following are a list of the settings available:
•Beep: ON/ OFF
•Battery Type: Alkaline Batteries/ UPB-1 Battery Pack
•APO (Auto Power Off): ON/ OFF
•Auto Channel Select: Remove/ Add
•VOX (Voice Activated Control) Gain Level: OFF/ 1/ 2/ 3
•VOX Delay Time (Only available when VOX Gain Level is
not OFF. Refer to page 17.): 0.5/ 1.0/ 2.0/ 3.0 seconds
•Calling Alert Tone: 1 ~ 10
•Squelch: ON/ OFF
3Refer to the appropriate sections below for details of
adjusting each setting.
BEEP TONES
You can turn the transceiver beep tones ON or OFF, as
desired.
1Enter the Menu Settings (above) and
press the ▲ or ▼ key until you reach the
“BEEP” display.
2Press the key to turn the beep tones
ON ( ) or OFF ( ).