Emotiva DMC-1 manual TRIM Menu, How to Navigate the OSD Menus

OSD Menus

The first menu of the On Screen Display (OSD) has the following items listed. TRIMS, MODES, TONE, INPUTS, SETTINGS, and an EXIT option to quit programming. Press MENU on the Emotiva remote to bring up the first OSD menu screen.

How to Navigate the OSD Menus

Select any one of the options using the joystick pad UP and DOWN to navigate through them menu choices. Once you make a choice, a FORWARD arrow after text on the screen, shows there is more information on another page. A BACK

arrow shows that you can return to the previous page. When applicable, a DOWN arrow, such as at the bottom of the Inputs Menu, shows there is a second page of similar choices. In these circumstances, the UP arrow shows the way back to the first page.

UP Arrow

RIGHT Arrow

LEFT Arrow

DOWN Arrow

NOTE: You can quit the OSD at any time by pressing EXIT on the remote. Any changes you make will be saved. There is no need to navigate back through previous pages, unless you want to make more changes.

TRIM Menu

This menu allows you to adjust the individual volume level of your speakers “on-the-fly.” Although careful calibration is key to a good home theater, the Trims allow fine adjustment of the current program playing. The Trims add or subtract from the reference levels set during calibration using the Speaker Calibration menu.

Recalibrating will reset these on-the-fly trims to zero.

Note: The Trim adjustments do not exceed +/-10 dB

Page 51