Emotiva DMC-1 manual Option

Here are two connection options:

See Option 1

Note Below

Use either output to activate the MAIN ZONE amplifier(s)

These terminals can

be secured with a small “jewelers” screwdriver

Option 1

12 VDC output whenever MAIN ZONE is selected

This shows independent 12 VDC outputs that will turn on any compatible external amplifier with a 12 VDC trigger input. Use the middle relay contacts to enable another independent device that will turn on (as the contacts close) whenever a “trigger enabled” input in the MAIN ZONE has been selected. DO NOT use the center relay contacts for 120 VAC or 240 VAC switching! They are only for low voltage AC/DC loads of 2 A maximum. Typically this will mean low voltage control of structured lighting systems, automated window coverings, or other low voltage devices. Never switch anything that plugs directly into the wall with these on-board contacts. This action will damage the unit and VOID THE WARRANTY.

Option 2

This simply shows looping the 12 VDC into the relay contact to turn on a device using the available 12 VDC trigger already supplied.

Page 25