Emotiva DMC-1 1LCD Display, 2Button and Display Light, 3DEVICE Buttons, 4PAGE Button, 6FAV Button

1LCD Display

The top line shows the present device, mode or status, and it shows when a remote command is being transmitted. The bottom line shows the page number, status and basic instructions during programming.

The main part of the display shows the labels of the ten DEVICE buttons. You can change any label and customize the remote to fit your system. Note: this is not a touch-sensitive screen, just a way of labeling the device buttons on each side, and showing instructions and status.

2Button and Display Light

The button on the right side of the remote briefly turns on the lights for the buttons and display. Pressing it again will turn it off. The duration of time the lights stay on is adjustable or the lights can be disabled.

Adjusting the LCD Contrast

The contrast of the display can be changed by holding down the MAIN button and pressing the Joystick Pad UP or DOWN.

3DEVICE Buttons

Once you press a device button, all the device buttons change label and function to become buttons to operate your device. There are two pages per device, and you can move between them using the PAGE button.

4PAGE Button

Use this to jump to various display pages. For example, if you press the EMO device button, the display changes to some show buttons which control your DMC-1. If you press PAGE, the display will move to page 2, showing more functions for the DMC-1

5MAIN Button

This button will return the remote display back to the Main menu. Depending on which mode you are in, it may take two or more presses. This will help you get back to the Main menu if you ever get lost in the menus.

6FAV Button

This button allows you to step through five display pages of your favorite TV and radio stations. These can be set and relabeled to suit.

7JOYSTICK PAD

This pad and surrounding buttons are used to operate standard DVD menus, and VCR and Tape Deck controls. In EMO mode, if you press MENU, the On Screen Display will appear and the joystick can be used to select and adjust the various items.

8M1, M2 and M3 Macro Buttons

These MACRO buttons can be programmed to send out a sequence of commands with a single press.

Page 38