Place LEFT, CENTER, and RIGHT main

speakers at equal distances from the

listening position.

The Front Speakers

You should closely follow the placement recommendations of your speaker manufacturer, with the addition of the following points:

•The left and right front speakers should be positioned so that your TV is exactly centered between them. This will help focus your attention towards the screen.

•For the best overall imaging, the left speaker should be set exactly the same distance and angle away from your listening position as the right speaker. It is recommended that you use a tape measure to set them up to be the same distance away, within about half an inch tolerance.

If you have a smaller TV, the speakers should be no more than two feet away from the sides of the TV. If possible, have the center, left and right speakers at the same height (within two feet). This will help give a smooth transition when sound effects move from speaker to speaker.

Ideally, the speakers should be no closer than two feet from the rear and side walls, in order to reduce any reflections that might upset the imaging. If your speakers are closer than this, you can experiment by adding sound deadening material such as drapes on the walls to reduce any unwanted

reflections.

Whenever possible, place the center

speaker no more than 12” (25.4cm) above

or below the front speakers

The Center Speaker

Most movie dialog will come from the center speaker, so careful positioning is an important part of a good home theater system. Your eyes and ears should focus your attention towards the center of the screen.

The center speaker can sit on top, or directly underneath the TV, as long as it is located on the centerline and not off to one side. Ideally you would try to maintain a deviation from the center line of the speakers of less than 12”. This means the center speaker will not be lower or higher than 12”to the center measurement of the LEFT and RIGHT MAIN speaker center measurements.

Position the front face of the speaker close to the front edge of the TV cabinet. (The sound waves may otherwise reflect off the top of the TV cabinet and distort the center imaging).

In some systems, two center speakers are used; one on either side of the TV. As they are in mono, the result is a sound image that is positioned exactly at the screen center.

Page 74

Page 73 Page 75
Page 74
Image 74
Emotiva DMC-1 manual Front Speakers, Center Speaker
Page 73 Page 75

DMC-1 specifications

The Emotiva DMC-1 is an advanced audio control processor designed to elevate your home theater experience to new heights. With a blend of modern technology and a commitment to high-fidelity sound reproduction, the DMC-1 is equipped with features that cater to both audiophiles and casual listeners alike.

One of the standout features of the DMC-1 is its capability to handle 16 channels of audio processing. This allows it to support up to 7.1.8 Dolby Atmos configurations, enabling an immersive sound experience that envelops listeners in their favorite films and music. The DMC-1 also supports DTS:X, providing an additional layer of flexibility for home theater enthusiasts seeking to create a customized audio setup.

At the heart of the DMC-1 is its state-of-the-art DAC (digital-to-analog converter) technology, which ensures that audio signals are converted with pristine accuracy. This includes high-resolution audio formats up to 24-bit/192kHz, allowing users to enjoy their favorite tracks and movies with remarkable clarity and detail.

The DMC-1 also integrates robust room calibration technology, featuring Audyssey MultEQ XT32. This allows the DMC-1 to analyze the acoustics of your room and optimize audio output for the best possible sound experience. This feature is vital for creating balanced audio in spaces that may have irregular dimensions or reflective surfaces.

Another key characteristic of the DMC-1 is its diverse connectivity options. With multiple HDMI inputs and outputs, the processor is well-equipped to handle various sources, from gaming consoles to streaming devices and Blu-ray players. In addition, the DMC-1 supports HDMI 2.0 with HDCP 2.2, providing compatibility with 4K Ultra HD content and HDR formats.

Emotiva's focus on user experience is evident in the DMC-1’s intuitive interface. It includes a full-color LCD screen and customizable on-screen menus, making navigation effortless. Additionally, the DMC-1 comes with a dedicated remote control, as well as integration options for control systems, making it easy to include in any smart home setup.

In conclusion, the Emotiva DMC-1 is a versatile and powerful audio control processor that promises to enhance any home theater system. With its advanced audio processing capabilities, high-quality DAC technology, automated room calibration, extensive connectivity options, and user-friendly interface, the DMC-1 stands out as a top choice for those seeking exceptional audio performance. Whether you're a movie buff, a music lover, or a gaming enthusiast, the DMC-1 delivers a level of sound quality and precision that is sure to impress.
Top Page Image Contents