Emotiva DMC-1 manual Quick Start Setup Instructions, Step, Adding Batteries to the Remote Control

Quick Start Setup Instructions

Most features of the Emotiva DMC-1 can be
operated by the remote control’s EMO section.
For the best Home Theater performance, you
should calibrate your speakers and customize the
DMC-1 settings for your system. Press the MENU
button on the remote control to activate the On
Screen Display (OSD). This has several menus
which will allow you to set up your speakers and
calibrate your system correctly. The remote can
also be used to activate and control all features	Step
of the second zone.
	9
Adding Batteries to the Remote Control
The DMC-1 Remote Control uses four AAA
batteries. They can be added by simply removing
the back cover of the unit and placing them
according to the diagram. Once installed, you
should expect 6-8 months of normal use before
having to replace them again.	Step

Remember that the remote will not lose 8 programming memory when the batteries are removed for changing. This will make subsequent battery replacements a breeze!

Quick Start Instructions for DMC-1 Setup
The following quick start instructions will help you
get started using your Emotiva DMC-1 with the	EXIT Button
least amount of trouble. For the best results, have
the DMC-1 up and running with a video screen
connected so you can take advantage of the On
Screen Display (OSD) feature. Make sure you have
read the safety precautions on the preceding pages
before attempting to use your DMC-1 or the remote.
You will need a measuring tape during this setup
process.

Step 1 - Add the batteries to the remote control as indicated.

Step

13

Step

14

Step 2 - Connect your source equipment and amplifiers to the DMC-1. If you haven’t yet done this, please refer to the connection diagrams in the subsequent sections of this guide.

Page 39