Emotiva manual DMC-1Front Panel Features, Power Button, IR Receiver Window, Processor Display

DMC-1 Front Panel Features

8 7 6 5

	9		1	2
		10			3	4
1 Power Button			4	Rotate this manual control clockwise to
	This turns the DMC-1 on or off. It is a non-			increase the volume. The dB level will
	latching momentary button. If you press
				appear in the front panel display. When
	Z II first, it can turn on Zone 2 (even if the
				turning on a new source, make sure the
	Main Zone is off).
				level is low, such as -80 dB and increase
	IMPORTANT – Please note the DMC-1			it slowly. The dB display becomes less
				negative as the volume increases.The
	requires initialization after the power cord			DMC-1 volume control is velocity sensitive.
	is plugged into the AC receptacle. Push and			If turned slowly, the volume will change
	hold the power button for approx. 5 seconds.			in small increments. If rotated quickly,
	The unit will power up after this small delay.			level change will be made in larger
	The second push of the power button will			increments.
	turn the unit off and after this the unit will
	turn on and off in a normal fashion.			Note: When the DMC-1 is turned on, it has a
2				deliberately slow and smooth volume ramp
	IR Receiver Window			from silence, up to the level that was set when
	This window should be clean and free from			the unit was last turned off. It can also be
	obstruction for the remote control to work			programmed to come up to a preset volume
	correctly.			you have selected, rather than the previous
3	Processor Display			volume.The knob does not turn when volume
		display shows		is operated from the DMC-1 remote.
	This soothing blue

which input is selected, the tuner frequency, volume level, and other useful information.

Page 14