9)Test the remote to see which buttons will operate your equipment. For example, if you were trying to control your TV, check the power, channel up and down, and volume up and down. If some of these buttons are not working correctly, choose another code for that manufacturer, or you can program over those not working by using the LEARN mode.

LEARN

The DMC-1 remote can learn commands from other remote controls. This is useful if the pre- programmed commands do not operate some of your equipment, if certain buttons do not work, or you want to customize key functions. NOTE: PAGE, MAIN, FAV, M1, M2 and M3 cannot be reprogrammed.

Find your original remote and make sure it has good batteries. You must also make certain it operates your equipment perfectly. Operate a few commands to ensure that the buttons you want to program are functioning properly from that original remote.

In the following example, the Emotiva remote will learn the PLAY command from a DVD remote.

1)Point the DVD remote into the Red IR top window of the Emotiva remote. Place them on a flat surface, about 1 to 2 inches apart, and avoid bright lighting or sunlight.

2)In the SETUP mode, press LEARN.

3)Select the DVD device button and the display will change to show some common DVD labels, remembering that there are two pages from which to choose.

4)Select the PLAY button just above the joystick pad. The display will show “READY.”

5)Press your DVD remote’s PLAY button. The display will show “GOOD” if it has been accepted. If it shows “FAIL,” press PLAY again.

6)Press another button on the Emotiva remote and repeat the procedure until all the DVD buttons you need are learned.

7)Press MAIN once to return to the LEARN mode, twice for SETUP and three times for the MAIN menu.

8)Try out the Emotiva remote and see if the learned buttons will successfully operate your equipment. You may find that some commands cannot be learned. This may happen because some commands are or too long , too short or simply not compatible with a learning remote such as the Emotiva remote, but this is very rare.

9)The EDIT command can be used to change the labels if some of the standard labels do not correspond to your original remote buttons

EDIT

This mode allows you to change the labels in the display to suit your system. You can change device labels, or the buttons on page 1 or page 2 of a device, or the FAV labels.

1)In the SETUP menu, press EDIT.

2)To edit a device label, press PAGE and then the device button. Go to step 5.

3)To edit a button on a device’s page 1 or 2, press the device button and its page 1 will appear. Press PAGE to reach page 2 if required. Go to step 5.

Page 45

Page 44 Page 46
Page 45
Image 45
Emotiva DMC-1 manual Learn
Page 44 Page 46

DMC-1 specifications

The Emotiva DMC-1 is an advanced audio control processor designed to elevate your home theater experience to new heights. With a blend of modern technology and a commitment to high-fidelity sound reproduction, the DMC-1 is equipped with features that cater to both audiophiles and casual listeners alike.

One of the standout features of the DMC-1 is its capability to handle 16 channels of audio processing. This allows it to support up to 7.1.8 Dolby Atmos configurations, enabling an immersive sound experience that envelops listeners in their favorite films and music. The DMC-1 also supports DTS:X, providing an additional layer of flexibility for home theater enthusiasts seeking to create a customized audio setup.

At the heart of the DMC-1 is its state-of-the-art DAC (digital-to-analog converter) technology, which ensures that audio signals are converted with pristine accuracy. This includes high-resolution audio formats up to 24-bit/192kHz, allowing users to enjoy their favorite tracks and movies with remarkable clarity and detail.

The DMC-1 also integrates robust room calibration technology, featuring Audyssey MultEQ XT32. This allows the DMC-1 to analyze the acoustics of your room and optimize audio output for the best possible sound experience. This feature is vital for creating balanced audio in spaces that may have irregular dimensions or reflective surfaces.

Another key characteristic of the DMC-1 is its diverse connectivity options. With multiple HDMI inputs and outputs, the processor is well-equipped to handle various sources, from gaming consoles to streaming devices and Blu-ray players. In addition, the DMC-1 supports HDMI 2.0 with HDCP 2.2, providing compatibility with 4K Ultra HD content and HDR formats.

Emotiva's focus on user experience is evident in the DMC-1’s intuitive interface. It includes a full-color LCD screen and customizable on-screen menus, making navigation effortless. Additionally, the DMC-1 comes with a dedicated remote control, as well as integration options for control systems, making it easy to include in any smart home setup.

In conclusion, the Emotiva DMC-1 is a versatile and powerful audio control processor that promises to enhance any home theater system. With its advanced audio processing capabilities, high-quality DAC technology, automated room calibration, extensive connectivity options, and user-friendly interface, the DMC-1 stands out as a top choice for those seeking exceptional audio performance. Whether you're a movie buff, a music lover, or a gaming enthusiast, the DMC-1 delivers a level of sound quality and precision that is sure to impress.
Top Page Image Contents