Kenwood XD-501, XD-551, XD-571S, XD-701, XD-751, XD-771S Relay play, A tip for use of the tape counter

26

Relay play

When tapes are set in the decks A and B and the reverse mode is set to “[” (play of both sides), play of the second deck will be started automatically after play of the first deck has been com- pleted. Tape play will be repeated alternately.

÷Relay play is not possible in the reverse modes “”” and ““”.

	section	A tip for use of the tape counter
	section	The tape counter is set to “0000” when a cassette tape is loaded.
	Preparation
	Preparation	By writing down the counter reading in case you want to inter-

		rupt recording (playback) in the middle of the tape, the memo
		will be helpful as a reference for locating the same position when
		continuing the recording (playback) the next time. The tape coun-
		ter figure decrements during recording or playback of the back
		side (while the 2 tape transport indicator is lit).
		To set the tape counter to “0000”, open the cassette holder once.
		Then the counter will be reset.

Basic section

Application section

Let's put out some sound

XD-SERIES (En)

AA

TAPE B 00 0 0

NR

Knowledge sections

Contents

COMPONENT SYSTEM/COMPACT HI-FISYSTEM XD-751/XD-701 XD-771S XD-551/XD-501 XD-571S 2Before applying power Safety precautions Contents System connection (XD-5...series) Basic section Application section Special features Demonstration Handling of discs and tapes 6System connection (XD-7...series) Speaker (right) Speaker and TV installation Caution regarding placement FM indoor antenna Speaker (left) 1Strip the coating from the tip of cord and twist the conductor (Optional Parts) Connect separately sold parts as shown in the figure MD recorder In regard to the SURROUND switch DIGITAL OUT jack (OPTICAL) FM outdoor antenna 10System connection (XD-5...series) Before connecting the Front Speakers Page Page 14Controls and indicators Main Unit Receiver 1ON/STANDBY POWER) key 2EX. BASS (Extra bass) key 3DISPLAY key Display Remote control Unit 18Operation of remote control unit For Russia 20Let's put out some sound Basic use method 1.Switching the power ON (OFF) 2.Selecting the desired output 3.Volume adjustment Muting the sound temporarily (Remote control unit only) Playback of CD 1. Load a disc 2.Start playback High-speedsearch in forward and reverse directions Playback of tape 1.Load a cassette tape 2.Select the deck to be used for playback 3.Start playback To wind tape at high speed To stop playback Selection of DOLBY NR (Noise Reduction) Relay play A tip for use of the tape counter Searching for the desired music program (DPSS) During play in direction 1 2 7 3 ¡ 1.Select the broadcast band 2.Select a station AUTO M EM O MEMO RY 04sW 17 0 O 30Let's record Recording (Deck B only) Recording 1.Load a tape in deck B 2.Select the tape transport direction 4.Select the source to be recorded 5.Start recording Beat cancel function Points in CD recording 1Put the CD player in pause mode 2Select the track to be recorded with the skip (4, ¢) keys (The CD player pauses at the beginning of the selected track.) Copying tape The contents of the tape in deck A can be copied onto the tape in deck B Load tapes in the decks 1Select the “TAPE” input 2Select “[” (double-siderecording) or ““” (one-siderecording) 34Playback of CD Listening in the desired sequence (program playback) 3Enter track Nos. in the order you want to play them 4Check the programmed tracks (and replace, add or delete tracks as required) To check: To replace a track in the program: P01 D2 T 0 1Select the programmed disc or track to be replaced and press the SET key Repeated playback To repeat only the programmed tracks To select another track in the middle of playing one DIsC R AN D R.D.S. (Radio Data System) (Except for some areas) Searching for a desired program type (PTY search) 3Start the search To change to a different program type : To be able to listen to the desired information at any time Set the reception band to FM. • 1Auto preset the stations 1Receive a broadcast 2Keep the AUTO key pressed (2 sec or longer) 4Wait for the desired information Waiting for information while a RDS station without EON function is tuned TP (Traffic Program) indicator 44Convenient CD recording Selection of the convenient CD recording type (CD EDIT) Recording only desired titles (CD ONE TRACK RECORD) Recording of an entire CD (CD RECORD) 4Start recording (CD EDIT) 4Set the tape length (recording time) and press the ENTER key ENTE R Recording the programmed titles (CD PGM RECORD) 2Select “CD PGM RECORD” 3Program the desired tracks 1Select tracks in the order you want to play them 2Check, replace, add or delete the Effective Sound Adjustment Adjustment of balance and input level Switching the spectrum analyzer display mode Effective Sound Adjustment Creation and memorizing of an equalizer pattern You can edit desired patterns manually and store them in memory 1Switch on the equalizer mode 2Select the number to be used for storage Enjoying Sound Field Effects Enjoying Karaoke (Except for some areas) Enjoying Karaoke 54Clock adjustment sET CL OC K AM 12 O Timer operation sLEE P TI M E Timer programming Timer operation 1Make preparations for the play (recording) The station should be Insert a disc 6Enter the OFF time A M8 O 7Make the desired reservation For timer playback or AI timer playback For timer recording When timer operation is not required To set the same timer program again Important Items Maintenance Reference Memory backup function 60In case of difficulty General Cassette deck CD player WARNING NOTICE: Specifications SURROND switch SUPPER WOOFER S.W. LEVEL MIC 1,2 / VOL For your records