The faceplate of the unit can be detached and taken with you,
helping to deter theft.
Removing the Faceplate:
Press the release button and drop open the faceplate.
Push upward the back of the faceplate bracket until it locks.
•Do not apply excessive force to the faceplate bracket without
attaching the faceplate. Doing so will cause the faceplate
bracket to be deformed.
•Do not touch the connector on the faceplate bracket after
removing the faceplate. Touching the connector may cause
damage to the unit.
•The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the faceplate
in its special storage case while detached.
•Do not expose the faceplate or its storage case to direct
sunlight or excessive heat or humidity. Also avoid places with
too much dust or the possibility of water splashing.
Reattaching the Faceplate:
Hold the faceplate so that the control panel faces the front
toward you and set the left side of the faceplate in the
faceplate bracket.
1
NOTE
2CAUTION
3
2
1
Theft Deterrent Faceplate
This function switches the type of information on the display
in standby mode.
Press the SRC button repeatedly to select the standby mode.
"ALL OFF" is displayed when the standby mode is selected.
Each time you press the S.A button, the display changes as
follows:
"ALL OFF" + Function indicator
Demonstration
(This is not available with the display mode set
to "Display Type B")
Date + Clock + Function indicator
2
1
Switching Display during the Standby mode
General features
— 16 —
English
Z910DVD(K)_U.S 02.12.13 6:41 PM Page 16