— 29 —
Display and Setting:
"Bi Phantom ON" / "Bi Phantom OFF"
•You cannot operate when “Dolby PL“ is set to “OFF”.
•Not available during the Dual zone system is on.
•You cannot operate when Dolby Digital 5.1ch surround or DTS
5.1ch surround DVD and DTS-CD are being played.
NOTE
6.Selecting the Acoustic Image
Display and Setting:
" PCM center ON" / " PCM center OFF"
•This select can be set, when the "Dolby PL" is turned OFF by
the 2ch PCM signal
•Not available during the Dual zone system is on.
NOTE
7.Turning the Centre Output On/Off
Select the sound output speaker for Multi channel sound.
Display and Setting:
"Multi CH 3/2" / "Multi CH 2/2" / "Multi CH 3/0" / "Multi CH 2/0"
"Multi CH 3/2" : Centre, Front and Rear speaker
"Multi CH 2/2" : Front and Rear speaker
"Multi CH 3/0" : Centre and Front speaker
"Multi CH 2/0" : Front speaker only
•Not available during the Dual zone system is on.
•You cannot operate when “Dolby PL” is set “OFF” by 2ch PCM
DVD, VCD or CD play, and other than in DVD mode.
•The setting may be invalid according to the disc signal format.
NOTE
8.Selecting the Multi Channel
Display and Setting:
"Sub Woofer ON" / "Sub Woofer OFF"
Not available during the Dual zone system is on.
NOTE
9.Turning the Sub Woofer Output On/Off
Z910DVD(K)_U.S 02.12.13 6:42 PM Page 29