Kenwood Z910DVD[K], Z910DVD[R] Surround Processor Control Setting:

— 27 —

Adjust the delay time for center output.

Display and setting:

"CNTR DTA" : 0.0feet/0.5feet/1.0feet/1.5feet/2.0feet/2.5feet/

3.0feet/3.5feet/4.0feet/4.5feet/5.0feet

•You cannot operate when the “PCM Center“ is set to "OFF"

(page 29) <When playing with the 2ch PCM signal>.

•You cannot operate when the “Multi CH“ is set to “2/2“ or

“2/0“ (page 29) <When playing with multi-channels>.

NOTE

10.Delay Time for the Center Speaker

Adjust the phase for Sub Woofer output.

Display and setting:

"SW Phase" : Normal(0°) / Reverse (180°)

You cannot operate when the “Sub Woofer“ is set to “OFF“

(page.29).

NOTE

11.Phase for Sub Woofer Output

Press the #1 - #6 button for at least two seconds.

Recalling your settings of the Crossover network/Delay time

Press the #1 - #6 button for the desired crossover network and

delay time setting.

12.Storing Your Setting of the Crossover

network/Delay time

Surround Processor Control Setting:

Adjust various parameters of sound quality.

Press the Q button for at least one second to enter the control

mode.

Selecting mode

Press either the FM or AM button.

Each time the button is pressed, the adjustment mode will

change.

Please refer to the following for the contents of the

adjustment modes.(Items 1-10 can be adjusted in this

Adjustment mode.)

Adjust each mode

Press the 4/¢button.

Please refer to the following for the adjusting values.

Press the Q button to end the control mode.

When the Noise sequencer is turned ON, only item 10 can be

adjusted.

NOTE

4

3

2

1

You can recall the best audio setting preset for different types

of the music.

Display and Setting:

“FLAT“ / “POPS“ / “ROCK“ / “DANCE“ / “VOCAL“ /

“CLASSIC“.

•“User” displays each item when it’s adjusted.

•Not available during the Dual zone system is on.

NOTE

1.Recalling the Kenwood Preset Sound

Z910DVD(K)_U.S 02.12.13 6:42 PM Page 27

Contents

Main Z910DVD Z910DVD INSTRUCTION MANUAL DVD-RECEIVER Contents Z910DVD(K)_U.S 02.12.13 6:40 PM Page 2 Audio effect control features Tuner features DVD/VCD/CD player features 2Warning Menu settings NOTE Basic Operations of remote control................55 Installation Safety precautions To prevent injury or fire, take the following precautions: 2WARNING To prevent damage to the machine, take the following precautions: NOTE Cleaning the Faceplate Terminals Cleaning the Unit Cleaning the Disc Slot Reset button Handling Discs Page Before Use Glossary ALL MPEG: Moving Picture Expert Group (DVD, VCD) Dolby Digital DTS Top menu/menu (DVD) Title number (DVD) Volume Power Switching Modes Attenuator Switching the Upper Part Display Switching Display Mode Page Switching the Lower Part Display Switching Full-Screen Display Page Page System Q Speaker Setting Non-Fading Output Audio Control Setting: 4.Bass Extend 2.Bass Level 3.Bass Quality Factor 1.Bass Center Frequency Page Crossover Network Control Setting: Spatializer Function Setting: 4.Phase for Non-Fading Output 2.High-pass Filter Frequency for Rear Output 3.Low-pass Filter Frequency for Non-Fading Output Dual Zone System Audio Control Setting: Crossover Network Control Setting: 1.High-pass Filter for Front Output 2.Delay Time for the Front Right Speaker 4.High-pass Filter for Rear Output 3.Delay Time for the Front Left Speaker 7.Low-pass Filter for Sub Woofer Output 8.Delay Time for the Sub Woofer 6.Delay Time for the Rear Left Speaker 9.High-pass Filter for Center Output 5.Delay Time for the Rear Right Speaker Surround Processor Control Setting: Adjusting the Centre Frequency: Adjusting the Gain: 5.Using the DOLBY PRO LOGIC Adjusting the Quality Factor: 2.Parametric Equalizer 6.Selecting the Acoustic Image 7.Turning the Centre Output On/Off 9.Turning the Sub Woofer Output On/Off 8.Selecting the Multi Channel 10.Setting the Channel Balance Tuner features Tuning Tuner features Station Preset Memory Direct Access Tuning (Function of remote control) Auto Memory Entry Station Name Preset (SNPS) DVD/VCD/CD control features Playing DVDs/VCDs/CDs Forward / Reverse Search Disc Play DVD/VCD/CD control features Chapter Search (DVD) Track Repeat (VCD, CD) Track Search (VCD, CD) Next Play / Previous Play (VCD) Setting the Priority Language for Voice Selecting to the DVD Setup Menu 5/ 3TV/DVD/AUD button Page Page List of language codes Setting the Rating Level (parental lock) Page Page Setting the Zoom Setup Playing Other Disc mode Fast Forwarding and Reversing Disc Play Track Search Track / Disc Repeat Disc Search (Function of disc changers) Random Play Magazine Random Play (Function of disc changers) Track Scan Text Scroll Press the NAME.S button for at least two seconds. Presetting Disc Names (DNPS) Page Menu System 8 Security Code <In Standby mode> 7 Page Page External Amp Control Clean Reception System Circuit (CRSC) <In FM reception of Tuner mode> Text Scroll Built-in AUX Control + ABCDE JKL FGHIE IE JKIE Page 3Frame-by-frame playback (DVD/VCD) DVD/VCD/CD Control Function < DVD position > 3Stopping playback 3Switching the Menu Screen (DVD) 3Switching the Viewing Angle (DVD) Page Page Page Connecting Wires to Terminals Z910DVD(K)_U.S 02.12.13 6:43 PM Page 61 If no connections are made, do not let the wire come out from the tab. Installation Page Page Page DVD/VCD/CD control mode SOLUTION POSSIBLE CAUSEPROBLEM Z910DVD(K)_U.S 02.12.13 6:43 PM Page 67 External disc control mode If the following situations, consult your nearest service centre: Page FM tuner section AM tuner section DVD player section Audio section General