— 5 —
•If you experience problems during
installation, consult your Kenwood dealer.
•If the unit fails to operate properly, press
the Reset button. The unit returns to
factory settings when the Reset button is
pressed. If the unit still fails to operate
properly after the Reset button has been
pressed, contact your local KENWOOD
dealer for assistance.
•Press the reset button if the CD auto
changer is first controlled and operates
incorrectly. The original operating condition
will return.
•We recommend the use of the Security
Code function (see p.51) to prevent theft.
NOTE •The illustrations of the display and the
panel appearing in this manual are
examples used to explain more clearly how
the controls are used. Therefore, what
appears on the display in the illustrations
may differ from what appears on the
display on the actual equipment, and some
of the illustrations on the display may
represent something impossible in actual
operation.
•The functions that can be used and the
information that can be displayed will differ
depending on the external disc players
being connected.
•There is no image on the monitor at times
other than DVD mode.

Cleaning the Faceplate Terminals

If the terminals on the unit or faceplate get
dirty, wipe them with a dry, soft cloth.

Cleaning the Unit

If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the
stain off with a cloth moistened with neutral
cleaner, then wipe neutral detergent off.
Applying spray cleaner directly to the unit
may affect its mechanical parts. Wiping the
faceplate with a hard cloth or using a volatile
liquid such as thinner or alcohol may scratch
the surface or erases characters.
2CAUTION

Cleaning the Disc Slot

As dust can accumulate in the Disc slot,
clean it occasionally. Your Discs can get
scratched if you put them in a dusty Disc
slot.

Lens Fogging

Right after you turn on the car heater in cold
weather, dew or condensation may form on
the lens in the disc player of the unit. Called
lens fogging, discs may be impossible to
play. In such a situation, remove the disc and
wait for the condensation to evaporate. If the
unit still does not operate normally after a
while, consult your Kenwood dealer.

Reset button

Z910DVD(K)_U.S 02.12.13 6:40 PM Page 5