■Before beginning your first training session, familiarize yourself thoroughly with all the functions and settings of the unit.
■A slight production of noise at the bearing of the centrifugal mass is due to the construction and has no negative effect upon ope- ration. Possibly occurring noise during reverse pedalling result from engineering and are absolutely safe.
■The exercise cycle has a magnetic brake system.
■The equipment is independent of revolutions per minute.
■Please ensure that liquids or perspiration never enter the machine or the electronics.
■Before use, always check all screws and
■Always wear suitable shoes when using.
■Use for your regular cleaning, maintenance and care our appliance maintenance set (Article no.
■Nobody may be in the moving range of a training person during training.
Instructions for Assembly
■Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer.
■Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the diagrams. The correct sequence is given in capital letters.
■The equipment must be assembled with due care by an adult person. If in doubt call upon the help of a second person, if pos- sible technically talented.
■Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please be careful when assembling this machine.
■Ensure that your working area is free of possible sources of danger, for example don’t leave any tools lying around. Always dispose packaging material in such a way that it may not cause any
danger. There is always a risk of suffocation if children play with plastic bags!
■The fastening material required for each assembly step is shown in the diagram inset. Use the fastening material exactly as instructed. The required tools are supplied with the equipment.
■Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand until resi- stance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced.
■For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. addition of tubing plugs).
List of spare parts page 31-32
When ordering spare parts, always state the full article number, spare- partnumber, the quantity required and the S/N of the product (see handling).
Example order: Art.no.
Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in (internal) packaging, which is safe for transportation, in the original box if pos- sible.
It is important to provide a detailed defect description / damage report!
Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this should be clearly stated on the order by adding the words „with fastening material“.
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please dispose of this article correctly and safely (local refuse sites).
GB KETTLER GB Ltd. |
| |
| Kettler House, Merse Road |
|
| North Moons Moat |
|
| Redditch, Worcestershire B98 9HL | |
| +44 1527 591901 | +44 1527 62423 |
www.kettler.co.uk | Mail: sales@kettler.co.uk | |
USA | KETTLER International Inc. |
|
|
| |
| 1355 London Bridge Road | +1 888 253 8853 |
| Virginia Beach, VA 23453 | +1 888 222 9333 |
www.kettlerusa.com |
| |
5
