Kettler 07861-600 manual Handling the equipment, Instructions for Assembly, List of spare parts

GB

Incorrect or excessive exercise may damage your health!

■Any interference with parts of the product that are not descri- bed within the manual may cause damage, or endanger the person using this machine. Extensive repairs must only be car- ried out by KETTLER service staff or qualified personnel trained by KETTLER.

■In case of enquiry, please contact your KETTLER dealer.

■In choosing the location of the apparatus, ensure a sufficient sa- fety distance from any obstacles. The apparatus must not be mounted in the immediate vicinity of main passageways (paths, doorways, corridors).

■The product is not suitable for use by persons weighing over 130 kg.

Handling the equipment

■Before using the equipment for exercise, check carefully to en- sure that it has been correctly assembled.

■Before beginning your first training session, familiarize yourself thoroughly with all the functions and settings of the unit.

■It is not recommended to use or store the apparatus in a damp room as this may cause it to rust. Please ensure that no part of the machine comes in contact with liquids (drinks, perspiration etc.). This may cause corrosion.

■The machine is designed for use by adults and children should not be allowed to play with it. Children at play behave unpre- dictably and dangerous situations may occur for which the ma- nufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly.

■The crosstrainer complies with the DIN EN 957 -1/-9, class HB. It is therefore unsuitable for therapeutic use.

■A slight production of noise at the bearing of the centrifugal mass is due to the construction and has no negative effect upon operation. Possibly occurring noise during reverse pedalling re-

Instructions for Assembly

■Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer.

■Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the dia- grams. The correct sequence is given in capital letters.

■The equipment must be assembled with due care by an adult person. If in doubt call upon the help of a second person, if possible technically talented.

■Please note that there is always a danger of injury when wor- king with tools or doing manual work. Therefore please be ca- reful when assembling this machine.

■Ensure that your working area is free of possible sources of danger, for example don’t leave any tools lying around. Al- ways dispose packaging material in such a way that it may not

sult from engineering and are absolutely safe.

■Do not use corrosive or abrasive materials to clean the equip- ment. Ensure that such materials are not allowed to pollute the environment.

■The crosstrainer has a magnetic brake system.

■To operate correctly, the pulse function requires a minimum vol- tage of 2,7 volts (only for computers working with batteries).

■The equipment is dependent of revolutions per minute.

■Please ensure that liquids or perspiration never enter the ma- chine or the electronics.

■Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly.

■Always wear suitable shoes when using.

■All electric appliances emit electromagnetic radiation when in operation. Please do not leave especially radiation-intensive appliances (e.g. mobile telephones) directly next to the cockpi or the electronic controlsystem as otherwise values displayed might be distorted (e.g. pulse measurement.

cause any danger. There is always a risk of suffocation if chil- dren play with plastic bags!

■The fastening material required for each assembly step is shown in the diagram inset. Use the fastening material exactly as instructed. The required tools are supplied with the equip- ment.

■Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be repla- ced.

■For technical reasons, we reserve the right to carry out preli- minary assembly work (e.g. addition of tubing plugs).

List of spare parts page 19-23

When ordering spare parts, always state the full article number, spare-partnumber, the quantity required and the S/N of the pro- duct (see handling).

Example order: Art. no. 07861-600 / spare-part no. 10100079 / 2 pieces / S/N ....................

Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.

Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this

should be clearly stated on the order by adding the words „with fastening material“.

Waste Disposal

KETTLER products are recyclable. At the end of its useful life ple- ase dispose of this article correctly and safely (local refuse sites).

4