GB
■Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be repla- ced.
■For technical reasons, we reserve the right to carry out preli- minary assembly work (e.g. addition of tubing plugs).
Handling the equipment
■Before using the equipment for exercise, check carefully to en- sure that it has been correctly assembled.
■It is not recommended to use or store the apparatus in a damp room as this may cause it to rust. Please ensure that no part of the machine comes in contact with liquids (drinks, perspiration etc.). This may cause corrosion.
■The machine is designed for use by adults and children should not be allowed to play with it. Children at play behave un- predictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are in- structed in its proper use and supervised accordingly.
■This Rowing machine is an exercise machine that works de- pendent from stroke sequence (speed)..
■A slight production of noise at the bearing of the centrifugal mass is due to the construction and has no negative effect upon operation. Possibly occurring noise during reverse pe- dalling result from engineering and are absolutely safe.
■The crosstrainer has a magnetic brake system.
■To operate correctly, the pulse function requires a minimum vol- tage of 2,7 volts (only for computers working with batteries).
■Before beginning your first training session, familiarize your- self thoroughly with all the functions and settings of the unit.
Care and Maintenance
■Damaged components may endanger your safety or reduce the lifetime of the equipment. For this reason, worn or dama- ged parts should be replaced immediately and the equipment taken out of use until this has been done. Use only original KETTLER spare parts.
■To ensure that the safety level is kept to the highest possible standard, determined by its construction, this product should be serviced regulary (once a year) by specialist retailers.
■Use for your regular cleaning, maintenance and care our ap- pliance maintenance set (Article no.
■Please ensure that liquids or perspiration never enter the ma- chine or the electronics.
List of spare parts page 30-31
When ordering spare parts, always state the full article number,
Example order: Art. no.
/2 pieces / S/N .................... Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in (in- ternal) packaging, which is safe for transportation, in the original box if possible. It is important to provide a detailed defect des- cription / damage report!
Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this should be clearly stated on the order by adding the words „with fastening material“.
Waste Disposal
KETTLER products are recyclable. At the end of its use- ful life please dispose of this article correctly and safely (local refuse sites).
GB | KETTLER GB Ltd. |
|
|
| |
| Kettler House, Merse Road |
|
| North Moons Moat |
|
| Redditch, Worcestershire B98 9HL | |
| +44 1527 591901 | +44 1527 62423 |
www.kettler.co.uk | ||
USA | KETTLER International Inc. |
|
| 1355 London Bridge Road | +1 888 253 8853 |
| Virginia Beach, VA 23453 | +1 888 222 9333 |
www.kettlerusa.com |
| |
5
