SECTION 2 Controls & Indicators (LCD Control Center)

fig. 11

c. After setting the desired Auto Off time, press

the Menu Button four times to scroll through

the remaining programming options and exit

fig. 13

e. If you want to set an “OFF TIME,” repeat the

procedure above in steps b & c to set your

desired “OFF TIME.”

Setting the Clock

Setting the clock is optional. When the clock is set, the time will appear in the LCD Control Center. NOTE: You must set the clock if you will be using the On/Off Time programming feature.

Programming On/Off Features

The Brewer provides three modes so that you can enjoy gourmet coffee, tea or hot cocoa on your own schedule. By programming your Brewer to turn on each morning, you will never have to wait for the Brewer to warm up to brew

READY

TO BREW

AUTO OFF SET

11:56 AM

MENU

the programming mode. “AUTO OFF SET”

(fig. 11) will now be indicated to confirm that

it has been set.

d. To cancel the Auto Off feature, press the

Menu Button twice to reach the Auto Off

CLOCK AUTO OFF

SET OFF TIME BREW TEMP

AM

PM

MENU

f. To complete the process, press the Menu Button

two more times to exit the programming mode.

The LCD Control Center will indicate the options

you have set.

g. The On Time and Off Time functions operate

fig. 9

SET CLOCK

AUTO OFF

ON OFF TIME

BREW TEMP

1.

Press the Menu Button.

2.

The word “OFF” will appear at the bottom

 

of the LCD Control Center to indicate that

 

the clock is not set. The programming

 

options will appear on the LCD Control

 

Center with a small arrow pointing to “SET

 

CLOCK” (fig. 9). “H” (Hour) and “M” (Minute)

a gourmet cup of coffee.

1.Leave it ON all the time. The Brewer can be left on all the time so that it is always ready to brew a fresh cup of gourmet coffee, tea or hot cocoa. To turn the Brewer off at any time, simply press the Power Button. (NOTE: Although the clock remains on if set, you can not brew a cup of coffee, tea or hot cocoa.) Press the Power Button again to restore power to the Brewer. You will have to wait for the water to heat up before the Brewer is ready to brew.

programming mode. Press and release the

Small Cup Button under the blinking “H”

to advance one hour at a time until “OFF”

is indicated.

3.Program your Brewer for a specific On/Off Time. NOTE: To use this programming feature, the clock must be set to the correct time. The clock will not be displayed unless the time is set.

fig. 14

independently from one another. To cancel

either set function, follow the steps above and

use the “H” and “M” buttons to advance to 12:00

AM. Make sure the M button is set to :00, then

change the “H” button. When you reach 12:00

AM, the Control Center will indicate “OFF” and

the function will be disabled.

MENU

Menu

Set Set

Hours Minutes

 

will appear and blink.

3.

Press or hold the blue Small Cup Button under

 

the blinking “H” until you have reached the

 

appropriate hour. If the hour has passed 12,

 

the indicator switches from “AM” to “PM.”

4.

Press or hold the blue Large Mug Button under

 

the blinking “M” to set the minutes.

fig. 10

CLOCK

SET AUTO OFF

ON OFF TIME

BREW TEMP

2.Set the Brewer to Auto Off following a specified period of time after the last brew.

a. Press the Menu Button twice to program the

Auto Off feature. The LCD Control Center will

display the programming options with a small

arrow next to “SET AUTO OFF” (fig. 10).

b. Press or hold the blue Small Cup Button

under the blinking “H” to advance 1 hour at

fig. 12

CLOCK

AUTO OFF

SET ON TIME

BREW TEMP

11:56AM

PM

MENU

a. After setting the correct time (required), press

the Menu Button three times to program the On

Time feature. The LCD Control Center will show

the programming options with a small arrow

next to “SET ON TIME” (fig. 12).

b. Press or hold the blue Small Cup Button under

the “H” to scroll through the hours to your

desired “ON TIME” hour.

READY

TO BREW

AUTO OFF SET

ON TIME SET

11:56 AM

MENU

EXAMPLE: If you chose to set the On Time at 6:15 AM and the Off Time for 10:00 PM, then the Brewer will be “READY TO BREW” and maintain hot water in the tank during that time so that it is always ready for you to brew. If you wanted to brew outside this window, simply press the Power Button and you can brew as soon as the water is heated and the “READY TO BREW” is indicated on

5.

When you have reached the correct time, press the Menu Button five

 

times to scroll through the remaining programming options and exit

 

the programming mode.

6.

The correct time should now be displayed in the LCD Control Center.

 

NOTE: If power is interrupted to the Brewer by unplugging it, or if power

 

is lost, follow the procedure above to reset the time as the clock will not be

MENU

Menu x2

a time, up to 9 hours.

c. Press or hold the blue Large Mug Button under

the “M” to scroll through the minutes to your

desired “ON TIME” minutes.

d.After setting the desired time, press the Menu Button to save the “ON TIME” and move to the “SET OFF TIME” (fig. 13).

the LCD Control Center.

NOTE: The “AUTO OFF” Timer and the On/Off Time programming options operate independently but can also be programmed to work together. For example, you can set the On Time function to turn on at 7:00 AM and then set the Auto Off Timer function to turn off the Brewer two hours after the last brew (fig. 14).

visible until the time is set.

10

11

Page 6
Image 6
Keurig B60 manual Controls & Indicators LCD Control Center, Setting the Clock, Programming On/Off Features