Keurig KB31 owner manual Cleaning & Maintenance, Cleaning External Parts

SECTION 5 Cleaning & Maintenance

Cleaning External Parts

IMPORTANT: Make sure the Brewer is unplugged before cleaning.

Regular cleaning of the Brewer’s external components is recommended.

•Brewer external housing

•Drip Tray

•Drip Tray Plate

BREWER

•Never immerse Brewer in water or other liquids.

•Clean the external housing of the Brewer and other external components with a damp, non-abrasive, lint-free cloth.

Cleaning the K-Cup®Portion Pack

Holder Assembly

IMPORTANT: Make sure the Brewer is unplugged before cleaning.

K-Cup®Portion Pack Holder Assembly parts include:

•Funnel

•K-Cup Holder with Exit Needle

The K-Cup Portion Pack Holder Assembly parts can be placed on the top shelf of the dishwasher. Use a low temperature cycle when cleaning.

DRIP TRAY AND DRIP TRAY PLATE

•When the red Drip Tray Overfill Indicator appears, the Drip Tray is almost full. Carefully remove by sliding tray toward you. Empty contents into the sink.

•Inspect the Drip Tray periodically and clean with a damp, non-abrasive, lint-free cloth.

Do not put the Drip Tray or the Drip Tray Plate in the dishwasher.

12

1.To remove the K-Cup Holder

Assembly from the Brewer, lift the Brewer Handle to open. Grasp the top of the K-Cup Holder with one hand. With the other hand, push up on the bottom of the K-Cup Holder Assembly until it releases (fig. 1).

fig. 1