SECTION 3 Buttons & Indicators
Power Button (does not illuminate)
Press to turn the Brewer power on and off.
Add Water Indicator
Flashing Blue — Fill the Cold Water Reservoir with cold water until it reaches just under the rim of the desired level – 6, 8, or 10 ounces of the Water Level Guide.
Brewer Handle Indicator
Flashing Blue — The blue light flashes when the minimum water amount of 6 ounces has been poured into the Cold Water Reservoir. After adding your desired amount of water (10 oz. maximum), lower the Cold Water Reservoir Lid. The light will continue to flash until you lift the Brewer Handle.
| Brew Button |
BREW | Flashing Blue — Indicates you are ready to brew. |
| Press the BREW Button. |
| Flashing Red – Indicates water is heating. |
| (approximately 2 minutes) |
| Solid Red – Indicates brewing and dispensing of |
BREW | beverage has begun. |
7
Your Next Brew
When the brewing process is complete, the Add Water Indicator light will appear. At this point you can begin making the next beverage, or you can power off.
Automatic Shut-Off
As a safety feature, your Brewer will automatically shut off at any stage when it is idle for longer than 90 seconds. Press the Power Button to restart. If it shut off while the BREW Button was flashing blue, lift and lower the Brewer Handle to reset.
Drip Tray Overfill Indicator
A red float will appear when the Drip Tray is almost full. Carefully slide Drip Tray out and empty contents into the sink.
