Keurig V500 manual Programming the “On Time” Feature, Programming the “Off Time” Feature, Step

SECTION 4

Setting the Time & Temperature

Programming the

“On Time” Feature

By programming your brewer to turn on each morning, you will never have to wait for the brewer to warm up to brew your first cup. It takes the brewer approximately 4 minutes to warm up from room temperature.

The clock must be set in order for the on/off feature to operate correctly. See page 17 for directions.

If power is interrupted to the brewer by unplugging it, or if power is lost, follow the procedure on page 17 to set the clock.

In “On Time” programming mode, the “H” will flash, indicating you are programming the hours. Use the + and - buttons to set the hours. Press the “Menu” button again to access the minutes. Use the + and - buttons to set the minutes. The clock is on a 11h setting and will switch to PM once the 11h mark is passed.

Once the “On Time” clock is set, press the “Menu” button to save your settings. The screen will move to the next programmable setting (Set Off Time).

Programming the

“Off Time” Feature

Programming your brewer to turn off each evening will ensure the brewer turns off each night when it will not be used.

The clock must be set in order to program the on/off feature.

See page 17 for directions.

In “Off Time” programming mode, the “H” will flash, indicating you are programming the hours. Use the

+and - buttons to set the hours. Press the “Menu” button again to access the minutes. Use the + and - buttons to set the minutes. The clock is on a 11h setting and will switch to PM once the 11h mark is passed.

Once the “Off Time” clock is set, press the “Menu” button to save your settings. The screen will move to the next programmable setting (Setting the Brew Temperature).

SECTION 4

Setting the Time & Temperature

Setting the Brew Temperature

The brewer has a preset temperature of 192° F. You can adjust the temperature up or down in 1-degree increments within the brewer range (187° – 197° F). Once set, your beverages will be brewed at the selected temperature.

At high altitudes, if boiling occurs, use the temperature adjustment to lower the temperature so that boiling does not occur.

Here is how to set the brew temperature:

Step 1

In “Set Brew Temp” mode, Use the + and - buttons to change the temperature.

Step 2

Press the “Menu” button to save your setting and return to the main screen.

Viewing Your Presets

Your settings will appear in the main menu. To review your current settings, touch the “Menu” button. You can change the settings at any time. Simply enter through the “Menu” to re-set any options using the directions in this section.

18 19