Key Digital KD-CDA3 + 5V DC, 110-120VAC, 60 Hz 7 watts, Mounting and Maintenance instructions

KDCDA3_OperInstructions.qxd 1/4/06 12:58 PM Page 16

Page 16 of 29

KD-CDA3 Operating Instructions

Make sure to use the correct wires when making the connections to the “Display” device (use the color matching system if possible).

The same consideration applies to the audio interfaces. Both analog and digital out- put options are provided on the KD-CDA3 HDTV Distribution Amplifier. Your analog Audio may drive the speakers in your display. Your digital Audio may connect instead to an A/V receiver having coaxial digital (PCM) interfaces for decoding surround sound signals.

Insert the Power Supply adapter plug, here

Next, plug the external Power Supply provided with your unit into an appropriate* wall outlet.

*Power Requirements

■External power supply

■+ 5V DC, 110-120 VAC, 60 Hz (7 watts)

Page 17 of 29

KD-CDA3 Operating Instructions

You MUST use the Power Supply that came with your unit:

+ 5V DC, 110-120 VAC, 60 Hz (7 watts)

For added safety and protection it is always recommended to use a good quality surge protector.

Use a reliable “Source” to test your connections (like a DVD player) before routing or hiding any wires behind walls or ceilings.

Mounting and Maintenance instructions

The KD-CDA3 HDTV Distribution Amplifier is built for years of trouble free operation. It can be installed in any home theater, showroom, or other system using multiple dis- plays. Cleaning or maintenance is usually not necessary, but if needed use a soft non-abrasive dry cloth to wipe the dust from the unit.

Since the KD-CDA3 is an electrically powered device, it will produce a small amount of heat; therefore it is recommended to leave a few inches of room around the unit to dissipate this heat. You may attach the mounting clip provided to a suitable location, and then carefully clip the KD-CDA3 into the mounting clip once the mounting clip is secure.