Key Digital manual KD-CDA3Operating Instructions, 3dB @ 300 MHz Linear phase pass-band

Models: KD-CDA3

1 18
Download 18 pages 39.54 Kb
Page 16
Image 16
■-3 dB @ 300 MHz

KDCDA3_OperInstructions.qxd 1/4/06 12:58 PM Page 26

Page 26 of 29

KD-CDA3 Operating Instructions

Cable Recommendations

Each run of YPbPr cable MUST be the same length (300’ maximum)

Bandwidth

-3 dB @ 300 MHz

Linear phase pass-band

Drives video signals up to 300 feet

Video Gain

Unity gain for YPbPr and RGBHV

Analog Audio

Analog stereo (Left and Right) Audio

Two RCA-type color-coded input connectors (L, R)

High-impedance (1K ohm) line level inputs

RGBHV installations preclude Audio distribution with your KD-CDA3 unit

Digital Audio

Use the analog Audio Left and Right connectors for digital PCM Audio

Standard PCM digital format

RGBHV installations preclude Audio distribution with your KD-CDA3 unit

Mechanical

Size: 4” x 8” x 1-13/16”

Page 27 of 29

KD-CDA3 Operating Instructions

Weight: 1.5 lbs. (0.7 kg.)

Enclosure Type: Metal

Plastic mounting bracket, included

Mounting Information

A convenient mounting bracket is provided

The top and bottom of the unit are solid metal (no vents)

The unit may be oriented horizontally, or mounted vertically on a wall

Use #8 or M4 screws to hang the unit (keyhole slots are provided on the base of the unit)

CAUTION: If installing the KD-CDA3 unit or Mounting Bracket into sheet-rock or hollow walls, provide proper screw support with bolts or sheet-rock anchors.

Power Requirements

External power supply

+ 5V DC, 110-120 VAC, 60 Hz (7 watts)

CAUTION: No other power supply adapter can be used with this unit! Using a power supply other than the one provided by Key Digital® with your unit VOIDS THE ENTIRE PRODUCT WARRANTY, may cause damage to your unit and associated equipment, and is a potential safety hazard.

Page 16
Image 16
Key Digital manual KD-CDA3Operating Instructions, 3dB @ 300 MHz Linear phase pass-band