Assembly
FIGURE 7
Step 1:
Remove Screw (F3) from Handlebars (F1). Next, connect one Pulse Wire
(B6) to each Handlebar Pulse Wire (F5). Slide both Handlebars (F) into Console Tube (B) and twist the bars to bring them back together. Use Screw (F3) to secure them together. Last, use two Bolts (B7) to secure Handlebars (F) to Console Tube (B).
Figure 7
FIGURE 8
Step 1:
Attach Right Pedal (H6) to Right Pedal Tube (A37) by using two Bolts (J4), two Flat Washers (J5), two Spring Washers (J6), and two Knobs (J7).
Step 2:
Attach Pedal Joint Covers (H3 & H4) to Right Pedal Tube (A37) using two Screw (J2).
Repeat steps for left side.
Figure 8
9
