5.Turn LOCKING KNOB counterclockwise to loosen. Pull LOCKING KNOB out and insert SEAT POST into SEAT POST TUBE to desired seat height. Release LOCKING KNOB so that it springs into a hole in the SEAT POST and turn clockwise until tight to remove any looseness.
IMPORTANT: LOCKING KNOB must be locked tightly into hole in SEAT POST before you sit on the SEAT.
DETAIL
6.Connect EXETENSION WIRE in CONSOLE TUBE to REED SWITCH WIRE in FRAME. Connect the TENSION CABLE in CONSOLE TUBE to the TENSION BLOCK in FRAME (See Detail). Secure CONSOLE TUBE to FRAME with BUTTON HEAD SCREWS and WASHERS.
8 | 9 |
