9.ATTACHING CONNECTING ARMS TO LOCKOUT ROD: (SINGLE ACTION MODE)
Carefully tap PUSHNUT onto ends of LOCKOUT ROD with hammer. Lower SLOT in CONNECTING ARM onto LOCKOUT ROD and slide RETAINER back over LOCKOUT ROD to lock CONNECTING ARM in SINGLE ACTION MODE.
10.CONNECTING ARM ADJUSTMENT
NOTE: There are three ADJUSTMENT HOLES in each CONNECTING ARM. The CONNECTING ARM comes attached to the END HOLE. The END HOLE puts the GRIP end of the HANDLEBARS closer to you, which is better for shorter people. The INSIDE HOLE puts the GRIP end farther away from you which is better for taller people.
Remove HAIRPIN COTTER and 5/16” WASHER from PIVOT PIN in HANDLEBAR. Slide desired ADJUST- MENT HOLE of CONNECTING ARM onto PIVOT PIN of HANDLEBAR. Place 5/16” WASHER over PIVOT PIN and insert HAIRPIN COTTER through hole in PIVOT PIN to lock in place.
12 | 13 |
