Assembly of ET530D
REMOVE ALL SECURITY TAPE AND WRAPPING
BEFORE BEGINNING.
1. Make sure that the three wires are extending from the top of the Main Upright Tube (3) and that the Upright Cover (38) is put on. Carefully slide the Main Upright Tube (3) upward into the Main Frame (1) and attach with:
•One Bolt (11) with one Washer (37)
•One Carriage Bolt (41) with one Nylock Nut (31) and one Washer (37)
You will need to tighten the Carriage Bolt (41), Nylock Nut (31) and Washer (37), which was already in place.
1
2.Attach the Rail Tube (2) to the rear of the Main Frame (1) with two Nylock Nuts (31), two Arc Washers (60), and two Carriage Bolts (59).
2
4 | 5 |
