![](/images/new-backgrounds/1246156/24615611x1.webp)
Assembly
Assembly requires the included allen wrench.
Do not plug in the power cord until all assembly
steps are completed.
Step 1:
Place the left and right fenders through the tube of the left and right uprights as shown in Figure 1.
Step 2:
Slide the fenders up the upright assembly and pull the console harness through the hole in bottom of the left upright tube as shown in Figure 2.
Figure 1 |
UPRIGHT |
FENDER |
Figure 2 |
CONSOLE HARNESS |
6 |