![](/images/new-backgrounds/1246156/24615613x1.webp)
Assembly
Step 3:
Connect the console harness from inside the left upright to the console harness from the base assembly as shown in Figure 3.
Next, attach left upright and right upright to base using allen bolts M8x15 (Qty. 8) and washer 9x22x2 mm (Qty. 8). Do not tighten bolts all the
way at this time.
Figure 3
CONSOLE HARNESS
ALLEN BOLT
WASHER
Step 4:
Attach the console assembly by connecting the console harness, incline harness, EKG harness, and speed harness as shown in Figure 4.
Next, attach the console assembly to the left and right uprights using phillip screw M6x12 (Qty. 4).
Figure 4 |
CONSOLE |
PHILLIP SCREW |
WIRE HARNESS |
UPRIGHTS |
7 |