Assembly
After opening the box, remove any packing material from the treadmill.
Do not throw away any packing materials until the unit is working properly.
Place the base on a clean, level surface. Make sure the electrical cord will easily reach an electrical outlet. Locate the hardware pack and identify the following parts required for assembly.
Main Components: | Key # | Qty. |
Console Assembly | 1 | |
Upright Assembly | 1 | |
Boot Left | 1 | |
Boot Right | 1 | |
Endcap Left | 1 | |
Endcap Right | 1 |
Insert Pack: | Key # | Qty. |
Philip Screw #8*5/8” | 10 | |
Button Head Screw | 6 | |
Button Head Screw | 2 | |
Safety Key | 1 | |
Allen Wrench 3/16” | 1 | |
Allen Wrench 5/16” | 1 | |
Allen Wrench Clip | 1 | |
Cup Holder | 1 | |
Owner’s Manual | 1 | |
Chest Strap (OB Model Only) | 1 |
5
