Assembly
Step 18
Note: Stretch all cables out completely and make sure all twisting is removed before installing. Install Lat Cable (110) as detailed in Figure 18. Follow dotted lines to identify exact
location of pulleys. See Page 43 “Cable View” for more detail.
Start by threading cable end into Top Plate (55).
You will need the following for installation:
Pulley (57) - Qty. 7 | Bolt (134) - Qty. 2 |
Cable (110) - Qty. 1 | Bolt (135) - Qty. 1 |
Nut (144) - Qty. 7 | Bolt (136) - Qty. 1 |
Long Pulley Spacer (123) - Qty. 4 | Bolt (137) - Qty. 1 |
Longer Pulley Spacer (121) - Qty. 4 | Bolt (141) - Qty. 2 |
Cable Retainer Bracket (46) - Qty. 1 |
|
Figure 18
32
