Assembly
Step 17
Slide two Upholstered Roller Pads (58) onto Foam Frames (25 & 26) and secure using two Big Plugs (89). Slide the Long Foam Tube (34) through the hole in Seat Pad Support (27). Next, slide two Plastic Washers
(90), two Upholstered Roller Pads (58), and two Big Plugs (89) onto each end of Long Foam Tube (34). Next, slide two Upholstered Roller Pads (58) onto each side of Leg Hold Frames (29 & 30) and secure using
two Big Plugs (89).
Figure 17
31
