ASSEMBLY
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
STEP 1
Connect Main Frame (2) to Front Base (3) by securing with Bolt (15), Washers (17) and Nylon Lock Nut (18).
STEP 2
Slide Upright Frame (1) into Main Frame
(2). Make sure that adjustment holes in Upright Frame (1) face toward Main Frame
(2).
Slide Bolt (15) into Upright Frame (1) and secure with Washers (17) and Nylon Lock Nut (18). This bolt will keep the Main Frame (2) connected to the Upright Frame
(1) during adjustments.
Y
