ASSEMBLY
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
STEP 4
Insert the slide tube (19) into the base and secure with pedal pin adjustment. Connect slide tube
(19)and seat frame (6) using: 3 x (41) Bolt
5 x (54) Washer
2 x (59) Nylon locknut
Attach seat support (7) and back pad frame (9) to the seat frame (6) using:
4 x (66) | Bushing | 1 x (13) | Bolt shaft M10*12*213 |
2 x (55) | Washer | 2 x (59) | Nylon locknut M10 |
Attach back pad support (10) to the main upright (3) and the back pad frame (9) using:
1 x (50) | Bolt M12*75 | 1 x (18) | Bolt shaft M10*12*200 |
4 x (66) | Bushing | 4 x (55) | Washer |
1 x (60) | Nylon locknut M12 | 2 x (59) | Nylon locknut M10 |
[
