Program and Operating Instructions
♦QUICK START / MANUAL MODE
♦Plug into a surge protector outlet. Attach RED Safety Key to treadmill console.
♦Stand on the treadmill and straddle belt. Attach safety key clip to your clothes.
♦Press POWER button. There will be an eight (8) second delay after pressing the POWER button before data can be entered. The TIME window will flash.
♦Press START/STOP button. Belt will begin to move after 4 seconds. Step on belt slowly after the belt starts moving. Speed or incline may be adjusted by using the appropriate + (increase) or – (decrease) buttons.
♦To end your workout, press START/STOP button. Belt will gradually slow to zero.
♦To pause your workout, press PAUSE.
♦To
RESUME AT THE SPEED THE TREADMILL WAS MOVING BEFORE PAUSING.
♦Countdown Time, Preset Speed and/or Incline: Time, Speed, and Incline may be preset prior to getting started. After pressing the POWER button, the time window will blink. Use the SPEED/TIME + or – arrows to select your workout time, then press the ENTER PROGRAM button. The SPEED/TIME window will now be flashing. Using the same + or – arrows, select the speed for your workout, then press ENTER PROGRAM. Now the INCLINE window will be flashing. Use the INCLINE + or – arrows to set your workout incline, then press ENTER PROGRAM. To start, press the START/STOP button.
POWER
START/STOP
ENTER | PAUSE |
|
INCLINESPEED/TIME
Alternative Speed and Incline Toggles Switches
PAGE 10
