Exiting Emergency Mode

NOTE: This feature is only applicable to the radio sending the Emergency Alarm.

Your radio exits Emergency mode when one of the following occurs:

Emergency Alarm acknowledgement is received (for Emergency Alarm only), OR

An Emergency Exit Telegram is received, OR

All retries to send the alarm have been exhausted, OR

The Emergency Off button is pressed.

NOTE: If your radio is powered off, it exits the Emergency mode. The radio does not reinitiate the Emergency mode automatically when it is turned on again.

If you change channels when your radio is in Emergency mode to a channel that has no emergency system configured, No Emergency is shown on your display.

Text Messaging Features

Your radio is able to receive data, for example a text message, from another radio or an e-mail application.

Sending a Quick Text Message

Your radio supports a maximum of 50 Quick Text messages as programmed by your dealer.

NOTE: While Quick Text messages are programmed, you can edit each message before sending it. Only available with a keypad microphone (see Editing a Quick Reply Message on page 90).

Procedure:

Press the programmed Text Message button and proceed to Step 3.

OR

Follow the procedure below.

1g to access the menu.

2f or h to Messages and press g to select.

3f or h to Quick Text and press g to select.

4f or h to the required Quick Text and press g to select.

5f or h to the required alias or ID and press g to select.

Advanced Features

49

English

Page 61
Image 61
Motorola XPR 5550 manual Text Messaging Features,  Exiting Emergency Mode,  Sending a Quick Text Message