![](/images/new-backgrounds/1310082/310082159x1.webp)
Advanced Features
68
Setting the Tone Alert Volume Offset Level ![](/images/new-backgrounds/1310082/310082159xi2.webp)
You can adjust the Tone Alert Volume Offset level if needed. This feature adjusts the volume of the tones/alerts, allowing it to be higher or lower than the voice volume.
Procedure:
1g to access the menu.
2f or h to Utilities and press g to select.
3f or h to Radio Settings and press g to select.
4f or h to Tones/Alerts and press g to select.
5f or h to Vol. Offset and press g to select.
6for hto the required volume value. The radio sounds a feedback tone with each corresponding volume value.
7Press g to keep the required displayed volume value.
OR
Repeat Step 6 to select another volume value.
OR
eto exit without changing the current volume offset settings.
Turning the Talk Permit Tone On or Off ![](/images/new-backgrounds/1310082/310082159xi3.webp)
You can enable and disable the Talk Permit Tone if needed.
Procedure:
1g to access the menu.
2f or h to Utilities and press g to select.
3f or h to Radio Settings and press g to select.
4f or h to Tones/Alerts and press g to select.
5f or h to Talk Permit and press g to select.
6Press g to enable Talk Permit Tone. The display shows 9 beside Enabled.
OR
Press g to disable Talk Permit Tone. The 9 disappears from beside Enabled.
Setting the Power Level
You can customize your radio’s power setting to high or low for each channel.
Settings: High enables communication with radios located at a considerable distance from you. Low enables communication with radios in closer proximity.
Procedure:
Press the programmed Power Level button to toggle transmit power level between high and low.
English