If unsuccessful, a negative indicator tone sounds and the display shows negative mini notice.
OR
Procedure:
Use the menu.
1g to access the menu.
2f or h to Contacts and press g to select.
3f or h to the required subscriber alias or ID and press g to select.
4f or h to Remote Mon. and press g to select.
5The display shows transitional mini notice, indicating the request is in progress. The green LED lights up.
6Wait for acknowledgment.
7If successful, a positive indicator tone sounds and the display shows positive mini notice. Your radio starts playing audio from the monitored radio for a programmed duration and display shows Rem. Monitor.
Once the timer expires, the radio sounds an alert tone and the LED turns off.
OR
If unsuccessful, the radio sounds a negative indicator tone the display shows negative mini notice.
You can also manually select a target radio address (see Initiating Remote Monitor by Manual Dial on page 82).
Stopping Remote Monitor
Remote Monitor automatically stops after a programmed duration or when there is any user operation on the target radio.
Procedure:
1Press the programmed Transmit Interrupt Remote Dekey button.
2The display shows transitional mini notice, indicating the request is in progress. The green LED lights up.
3Wait for acknowledgment.
4If successful, a positive indicator tone sounds and the display shows positive mini notice.
OR
If unsuccessful, a negative indicator tone sounds and the display shows negative mini notice.
Advanced Features
29
English
