Program Operation

QUICK START / MANUAL MODE

1.Plug into a surge protector outlet. Attach the Safety Key on to the treadmill console.

2.Stand on the treadmill and straddle belt. Attach safety key clip to your clothes.

3.Press POWER button. There will be an eight (8) second delay after pressing the POWER button before data can be entered.

4.Press START/STOP button. Belt will begin to move after 4 seconds. Step on belt slowly after the belt starts moving. Speed or incline may be adjusted by using the appropriate + (increase) or – (decrease) button.

5.To end your workout, press START/STOP button. Belt will gradually slow to zero.

6.To pause your workout, press PAUSE.

7.To re-start after pausing: Press the PAUSE button. WARNING: THE TREADMILL BELT

WILL RESUME AT THE SPEED THE TREADMILL WAS MOVING BEFORE PAUSING.

8.Countdown Time, Preset Speed and/or Incline: Time, Speed, and Incline may be preset prior to getting started. First, press the POWER button, then press the ENTER PROGRAM button, the time window will blink. Use the SPEED + or - buttons to select your work- out time, then press the ENTER PROGRAM button. The SPEED window will now be flash- ing. Using the same + or - buttons, select the speed for your workout, then press ENTER PROGRAM. Now the INCLINE window will be flashing. Use the INCLINE + or - buttons to set your workout incline, then press ENTER PROGRAM. To start, press the START/STOP button.

ENTER PROGRAM INCLINE

START / STOP

SPEED

PAUSE POWER

13

Page 13
Image 13
Keys Fitness Treadmill TRI-ENDURANCE owner manual Program Operation, Quick Start / Manual Mode, Start / Stop, Pause Power