Assembly
Step 5:
Attach left inside handle cover and left outside handle cover to left upright using Phillips screw ST4.2x13 (Qty. 3) as shown in Figure 5.
Repeat assembly step for right side handle covers.
Step 6:
Tighten all Allen bolts (Qty. 8) installed in Step 3. Note: Move the fenders up to access the Allen bolts.
Next, attach both left and right fend- ers to base using Phillips screws ST4.2x13 (Qty. 2) and Phillips screws M6x12
(Qty. 2).
Move the treadmill to its final location (see section titled “Moving Instructions”). Adjust the leveler feet so that the treadmill does not wobble while in use.
Figure 5 |
PHILLIPS SCREW |
Figure 6 |
| |
PHILLIPS SCREW |
| |
FENDER | LEVELER | |
FOOT | ||
| ||
8 |
|
