Features
Features
Titanium Deposit Impregnated Cone An Ultra High Performance look that is more rigid for less cone flex and less distortion.
Advanced Cone Technology The outer edge of the cone has been rolled to increase cone rigidity to decrease cone flex under high excursion.
SPAIR (Simple Pull Apart Insertable Replacement) A stamped steel removable cone assembly. (Patent Pending)
Uniplate V.2 with Vented
(Patent Pending)
1.Utilizes “X” Vent technology to insure proper dissipation of heat away from the voice coil during operation.
2.Provides enhanced heat transfer for cool operation and maximum power handling.
3.Increases the linear magnetic fields around the voice coil gap for superior cone motion control.
4.Releases pressure under ISD for freer cone motion and enhanced low bass.
SLAM (SPAIR Lockdown Attachment Mechanism) The alu-
minum frame attached to the SPAIR which properly secures the removable speaker assembly (SPAIR) to the BAM (Basket And Motor assembly).
SPLAT (Speaker Precise Location Alignment Tool) Locates
and anchors the BAM to the baffle of your enclosure.
ARCTIC Cap (Aluminum Rapid Cooling Thermal Induction Centering Cap) Mounted on top of the extended
S4 Quad Spider Array 4 Poly nomex spiders keeps the voice coil properly centered under high excursion.
Triple Stack Custom Tooled Magnets With a BAM this big, a
double just wouldn’t fill your appetite.
ISD (Inverted Structural Dome) Further increases cone’s resistance to flex under pressure.
Stitched Surround Prevents cone/surround separation at high excursions.
Dual
Oversized 3.5” Voice Coil With bottom rolled out for increased retention capabilities.
Strain Relief Boots for Tinsel Lead Wires Large heavy gauge tinsel lead wire with strain relief boots.
2 | SoloX Subwoofer |
