Mounting
6.Once the holes are marked remove template. Using a jigsaw
cutout the woofer hole and use a 3/8” drillbit for the mounting holes
WARNING!
You will need assistance for the following steps!
Baffle
7.Insert the SPLAT into the cutout and move into position.
8. Use masking tape to temporarily hold the SPLAT in place while securing the BAM. This tape can be removed after the corner hardware has been start-
ed.
9.With your assistant,
insert the BAM and start
the corner hardware. Now is the time you remove the unidirec- tional bonding strip!
(Tape) Tighten the dou- ble threaded studs to secure the BAM to the baffle.
10. Pull the wires out through the BAM and connect to the B3 Link of your choice. Make sure you are using proper polarity!
11. Remove the Gap Cap before inserting SPAIR.
8 | SoloX Subwoofer |