Installation

Installation

17.

 

 

 

Center buttons of assembly with wall plate

21.

a

b

c

holes (17. a). When aligned, push buttons

 

 

 

through holes and slide down to lock (17. b

 

 

 

 

 

& c).

 

Buttons

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

18.

Now it should look like this.

22.

 

 

 

21a.

C

D

C

Remove wall plate (C) from assembly by pressing locking tab (21a.) and lifting it off.

Note: Screws provided are for mounting directly into wood. If mounting into brick, drywall or other surfaces, use appropriate hardware.

Hold wall plate (C) inside outline and screw in 3 wood screws (D). Space screws evenly. There are multiple holes in wall plate giving many screw location options.

Reattach assembly to wall plate (see 17. a, b and c).

19.

20.

min. 20”

20a.

Move HearthGate™ to desired location.

Warning: A distance of a minimum of 20” from source of heat/fire to gate is recom- mended (see ”Important Notes” page 2). If this is not possible with sections included, optional 24” sections are available from your HearthGate™ dealer or KidCo.

Slide the assembly as close to cone as pos- sible (20a.). With a pencil, outline assembly on mounting surface.

23.

24.

Tighten 3 sets of assembly screws and nuts.

Now you are ready to mount other end of HearthGate™. Follow steps 13 to 23.

8

9

Page 5
Image 5
Kidco G70 manual 21a, 20a