Important Notes
Parts Check List
FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP THEM FOR FUTURE REFERENCE
Before attempting to unfold the gate, read instructions thoroughly. Failure to do so may result in damage to the gate or injury to your child.
Your HearthGate™ is completely assembled and folded compactly and must be unfolded in sequence. Unpack your HearthGate™ onto
a stable surface. Familiarize yourself with the parts by comparing them to the parts check list below.
It is recommended you place the gate a mini- mum of 20” from the source of heat/fire.
WARNING
At 20” away from the source of heat/fire, the gate could reach a temperature of 130˚. Since every fireplace/wood burning stove, barbe- que grill reaches different temperatures, test your unit at maximum heat output. If gate is hot to touch, move gate further from heat source than recommended 20”.
2
Standard HearthGate™ has five 24” sections including a walk through door
2 Wall Plates (C)
6 Screws for mounting directly into wood (D)
!WARNING
2 Wall Covers (A)
6 Screws for Wall Covers (E)
•Intended for use with children from 6 months through 36 months.
•Check the stability of the gate and tighten all hardware and mountings regularly.
•To prevent serious injury or death, securely install gate or enclosure and use according to manufacturer’s instructions.
•Never use with a child able to climb over or dislodge/open the gate or enclosure.
•Do not use if any part of the gate is broken or missing.
•Never use if gate is 3/4 of child’s height.
•This product will not necessarily prevent all accidents. Never leave child unattended.
•Use only spare parts available from KidCo.
•Never allow child to climb or swing on gate.
•Use only with locking/latching mechanism securely engaged.
•Place gate a minimum of 20” from source of heat/fire.
•Discontinue use if any part of gate is damaged.
•Never climb over gate.
•Never hang or tie toys etc. to any part of the gate.
2 Lock Fittings (B)
6 Nuts for Wall Covers (F)
2 Plastic Hinge Covers (G)
(use only on lower hinge when section is removed)
2 Plastic Hinge Caps (H)
(shipped assembled under bottom hinge of end sections)
2 Removable Cones (I)
(shipped assembled under top hinge of end sections)
2
3
